DRIPSEAL PJS 43
Highly economical lead substitute for filling cast iron pipe joint
We are leading manufacturer & Trader of Dripseal PJS 43.
A breakthrough in conventional system of sealing the C.I. Pipe Joint with lead. It would replace lead used for sealing pipe joints. Worldwide, lead or cement mortar is used for sealing the pipe joints. In case of lead, heating is required for melting, gasket/wet clay shuttering support is required for horizontal joints and finally hammering is must for proper caulking. Lead has negligible bonding strength, is toxic and pollutes the environment when heated. Cement mortar decays with the reaction of acid (used for cleaning toilets), requires water curing, has a tendency to develop shrinkage cracks, has low bonding strength, is not very durable and joints are not completely waterproofed.
DRIPSEAL PJS-43 has been developed to overcome all these drawbacks. Besides outstanding properties, low cost is plus point of this product. DRIPSEAL PJS-43 works out much economical than lead as its density (1.95gm/cc) is 1/6th that of lead (11.35gm/cc).
Salient Features :
· Two pack system, which hardens only on mixing.
· Being non viscous, it is easy to apply on horizontal pipe joints without shuttering support
· Cures at room temperature with a setting time of 4 to 6 hours
· Waterproof
· Resistant to chemicals
· Excellent bonding or hammering is not required
· Doesn’t shrink on setting
· Withstand pressure higher than 20 kg / cm2 in water supply pipe line
· Low labor cost as it is easy to apply
· Prolonged service life
· Non-polluting, toxic and environment friendly
Mixing:
It comes in two coloured packs, black and white. Mix both parts homogeneously in the supplied proportion. In cold weather conditions, both unmixed packets may be placed under sun or heated to room temperature (25 oC) to make them more workable for mixing.
Application :
Clean the pipe joint to make it free from dust, grease/oil, algae, mould growth, loose particulates, cement splashes and all other foreign matters and contaminants. Ensure the pipe joint is dry. Provide hamp yarn as usual in pipe joint as back filler. Force the mixed compound into the gap of pipe joint with caulking tool / MS flat piece / hand. Proper pressing of the compound is necessary to avoid air entrapment. For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening. Don’t disturb the joint till the compound has hardened.
Consumption :
| Diameter of Pipe (mm) | Consumption Per Joint (gm) |
| 50 | 130 to 150 |
| 80 | 150 to 170 |
| 100 | 200 to 250 |
| 150 | 250 to 300 |
Vinod Cement Co is dealing in waterproofing chemicals and waterproofing services since 1983. We specialize in waterproofing during and after construction. We have large chain of satisfied customers. We have a experienced, efficient and skilled team which provides timely solutions to your waterproofing needs with higher quality chemical products. Our timely services and quality products make us renowned among contractors, architects and builders in the area.
Our waterproofing chemicals are best suitable for roof, wall, brick tiles, terrace, terrace garden, sunken portion, for sealing and grouting cracks, swimming pool and basements. We have a good range of waterproofing chemicals that includes Epoxy coatings, Cement Admixtures, Polymer based coatings, cast iron pipe joint sealant, crack sealants, Silicon coatings and Plasticizer.
205, Steel Market, Sector-29 D,
Chandigarh-160030
J K Aggarwal
+91 94632-00194
vinodcementco@gmail.com